Experience Watchmaking & Jewelry Repair

Lost your password?

49.751photo1__29126.1410320241.500.500

 

Use this handy saw blade size reference chart to help determine the correct size saw blade needed. Finer saw blades are great for use with small parts and cutting rings for sizing, heavier saw blades are better for larger and less delicate cutting jobs. All sizes are for mini 6″ inch jewelry saw blades.

Use the chart below to determine your jewelers saw blade needs:

SizeThicknessBlade Depth(inches/mm)
Teeth Per
8/0.006″ / 0.15mm.013″ / 0.33mm84 Per Inch / 33 Per cm
7/0.007″ / 0.18mm.014″ / 0.36mm84 Per Inch / 33 Per cm
6/0.007″ / 0.18mm.014″ / 0.36mm76 Per Inch / 30 Per cm
5/0.008″ / 0.20mm.016″ / 0.41mm66 Per Inch / 26 Per cm
4/0.009″ / 0.23mm.017″ / 0.43mm64 Per Inch / 25 Per cm
3/0.010″ / 0.25mm.019″ / 0.48mm57 Per Inch / 22 Per cm
2/0.010″ / 0.25mm.021″ / 0.53mm53 Per Inch / 21 Per cm
1/0.011″ / 0.28mm.023″ / 0.58mm51 Per Inch / 20 Per cm
1.012″ / 0.30mm.025″ / 0.64mm47 Per Inch / 19 Per cm
2.013″ / 0.33mm.027″ / 0.69mm44 Per Inch / 17 Per cm
3.014″ / 0.36mm.029″ / 0.74mm40 Per Inch / 16 Per cm
4.015″ / 0.38mm.031″ / 0.79mm37 Per Inch / 15 Per cm
5.016″ / 0.41mm.033″ / 0.84mm35 Per Inch / 14 Per cm
6.017″ / 0.43mm.037″ / 0.94mm33 Per Inch / 13 Per cm
8.020″ / 0.51mm.045″ / 1.14mm28 Per Inch / 11 Per cm
10.024″ / 0.61mm.053″ / 1.35mm24 Per Inch / 10 Per cm
12.024″ / 0.61mm.065″ / 1.65mm20 Per Inch / 8 Per cm
14.024″ / 0.61mm.067″ / 1.70mm16 Per Inch / 6 Per cm

 

 

Click Here to See Our Saw Blades and Saw Frames

saw blade chart
 

You May Also Like...

3 Responses

  1. Bruce Eric Marriner Reply

    I’m attempting to locate blades that are a minimum of 6″ in length to fit an OLD marquetry ( inlaid wood veneer) saw. Every supplier that I have contacted sell only the standard 5.25″ blades. Do you have any suggestions/recommendations who may carry blades of this length ?

  2. Sum Reply

    Hi,
    You have different measures on this page and the page with Hercules saw blades – is that a real difference, or do your editor need to buy the next round? 😉

    • Esslinger Staff Reply

      No, there is no appreciable difference between the two. There might be a slight difference between brands but not enough to really notice.

Leave a Reply to Bruce Eric Marriner Cancel Reply

Your email address will not be published.