How to Change a Metal Watch Band - Spring Bar Style without Holes - Watch Band Replacement | Esslinger Watchmaker Supplies Blog
Watchmakers and Jewelers blog news information
Privacy Policy Terms and Conditions
Search Esslinger Watchmaker Supplies Blog

Categories

Posted by Esslinger Staff

Whether your current watch band is beginning to look dingy or tarnished, or you would just like to give your watch a new look, you can easily replace your metal watch band. This guide will help you change watch bands in cases without holes in the lugs. How do you know if your watch case does or does not have holes? Check the watch lugs, the metal part that sticks out to hold the watch band. If the lugs are smooth, then you should follow these steps to remove your watch band.

 

Tools Needed:

 

Step 1metalnoholes_step1

The first step in changing your watch band is to remove the existing watch band. Start by holding the watch so that it is sitting on its side with the watch crown pointing up. Hold the watch case so one side of the band is facing you.

 

 

Step 2

Take your spring bar tool and slip the forked end under the top lug. When the point catches on the spring bar, push down and then to the side to pop the spring bar free. This may be a little tricky depending on your watch case.

metalnoholes_step2

 

Step 3metalnoholes_step3

When the spring bar and top of the band are free you can easily pull that end of the watch band out of the case. Before you let the first part of the watch band hang free, remove the spring bar from the end and put it in the parts tray in case you can reuse it later.

 

 

Step 4metalnoholes_step4

Turn the watch case so that the half of the watch band that is still attached to the watch case is accessible to your tools.

 

 

Step 5metalnoholes_step5

Take your spring bar tool and repeat what you did before. Move the forked end in under the case lug and then push down and to the side to slide the spring bar free of the watch case.

 

 

Step 6metalnoholes_step6

First remove the spring bar from the watch band and put it in your parts tray to keep track of it. Then you can remove the watch band and lay it aside so you can remember which side of the watch case it came from. By doing this, you will ensure that the clasp of your new watch band will close the same way as the one on your original band.

 

Step 7metalnoholes_step7

Next you need to measure the watch band to determine the size of your replacement band. Once you have the size of the watch band needed, you can choose a size and style that you prefer. For lots of watch band options, visit our watch band page.

 

 

Step 8metalnoholes_step8

Now you are almost ready to place the new watch band onto the watch case. Take one side of the new watch band and determine which side of the watch case it belongs on from the old band. Once you know where one side of your new watch band belongs, grab one of the spring bars and insert it into the first end of your watch band. If the previous spring bars are in good shape you can use them in the new watch band.

 

Step 9

Pick up the watch case and hold it on its side again with the crown pointing to the ceiling. It should be positioned so you can access the side where the first side of the band belongs. Position the spring bar of the watch band in the hole in the bottom lug. Be sure that your watch band’s finished side is facing the same direction as the watch face.

metalnoholes_step9

Step 10metalnoholes_step10

Take the forked end of the spring bar tool and position it so that you can push one of the spring ends of the spring bar down so it fits under the lug. Carefully move the watch band around in the lugs until you feel and see the spring bar pop into place. This will happen when the spring bar finds the hole in the watch lug. Don’t worry if it takes you several tries to get the spring bar in position.

 

Step 11metalnoholes_step11

Now, turn the watch case so that you can access the other set of lugs and insert the second spring bar into the free end of the watch band.

 

 

Step 12metalnoholes_step12

Once the spring bar is in place, position the end of the new watch band between the watch lugs with the end of the spring bar in the hole in the bottom lug. The finished side should be facing the correct way already.

 

 

Step 13metalnoholes_step13

When it is place, use your spring bar tool to push the top part of the spring bar down so it can slide under the top watch lug. Just like you did with the first side, wiggle the watch band around under the top lug until it slips into place in its hole in the lug.

 

 

Finishedmetalnoholes_step14

Once both ends of the watch band have been securely attached to the watch case, you are ready to wear your watch again with its brand new look.

Visit Esslinger.com’s Learning Center for more watch repair guides.

 

 


 

Share Button